Gardese weed control fabric is offered in three roll widths: 1 m, 2 m, and 4 m, all 100 m long. The material, weight (100 g/m²), color (black), and UV protection are identical for all three. What changes is the usable width and, with it, the number of seams you will need to make on site. This comparison helps you choose the width that minimizes costs and installation time according to your plot's geometry.
🎯 Choose the variant in 10 seconds
- If your case is a home garden, flowerbed or narrow planter: go to the 1 m × 100 m variant
- If your case is a family orchard, nursery, pathway or greenhouse aisle: go to the 2 m × 100 m variant
- If your case is an agricultural plantation, commercial nursery or covering large areas: go to the 4 m × 100 m variant
What to consider before choosing a variant
All three variants share the same material (plastic resin), weight (100 g/m²), black color, and high UV protection. The choice comes down to the roll width and how it fits the area's geometry. These are the most important criteria:
- Usable width of your area: Measure the width of the flowerbed, path, or plot. The practical rule is to choose a roll whose width is equal to or slightly greater than the usable width, to avoid longitudinal seams, which are the main entry point for weeds.
- Number of seams: Fewer seams = fewer weak points + less installation time. An area 4 m wide covered with 4 rolls of 1 m needs 3 seams; with 1 roll of 4 m, none.
- On-site handling: A 1 m roll can be handled by one person; a 2 m roll, by two people comfortably; a 4 m roll requires equipment, space to unroll, and usually more hands. In greenhouses with narrow aisles, the 1 m or 2 m roll is more practical.
- Cuts and waste: If the geometry is regular, a wider roll minimizes waste. If you have irregular shapes (curved flowerbeds, mixed gardens), the 1 m roll is easier to adapt with fewer wedge cuts.
- Complete system: The fabric is usually covered with bark, gravel, or decorative chippings to secure it and protect it from direct UV over the long term. It is fixed to the ground with metal U-shaped staples every 1–1.5 m and at each joint.
1 m × 100 m variant: the manageable roll for home gardens
- 1-person handling: ideal for individuals
- Easy to cut and adapt to irregular shapes
- 100 m per roll: suitable for entire gardens
- Fits standard flowerbeds and planters
- Many longitudinal seams in wide areas
- Higher cost per m² covered than wider formats
The 1 m width is the natural choice for residential gardens: raised flowerbeds, lawn edges, planters between paving stones, mixed gardens with scattered plants. A single person can unroll, mark, and cut it without problem. It is also the choice when the garden's geometry is very irregular: a narrow roll generates fewer wedge cuts and minimizes waste.
2 m × 100 m variant: the versatile format for orchards and nurseries
- Covers twice the area of the 1 m variant with half the seams
- 2-person handling: comfortable for medium-sized jobs
- Standard width for greenhouse aisles or paths
- Good balance between performance and manageability
- Still requires seams on plots wider than 2 m
- Higher transport cost than the 1 m roll
The 2 m width is the benchmark for family orchards and small nursery operations: it covers the aisles between pots, crop rows under netting, and standard commercial garden paths with a single sheet. It also fits typical greenhouse aisle widths. With a two-person team, it unrolls quickly, and the number of seams is significantly reduced compared to the narrow roll.
4 m × 100 m variant: the industrial width for large surfaces
- 400 m² coverage per roll: maximum efficiency
- Minimizes longitudinal seams
- Lowest cost per m² covered in the range
- Ideal for nurseries and plantations in wide strips
- Requires 3–4 people or machinery for handling
- Oversized for domestic flowerbeds
- Requires space to unroll the fabric
The 4 m width is the choice for agricultural operations and commercial nurseries. Each roll covers 400 m² without longitudinal seams, which speeds up installation and reduces the risk of weeds finding their way between sheets. On a farm, it requires space to unroll the fabric and usually a team of three or four people (or machinery with an unroller) to handle it efficiently.
Comparative table of variants
All three variants are identical in material properties and differ only in roll width and, consequently, in coverage area per unit.
| Feature | 1 m × 100 m | 2 m × 100 m | 4 m × 100 m |
|---|---|---|---|
| Ideal use | Home garden | Orchard and nursery | Commercial agriculture |
| SKU | 351251 | 345629 | 623344 |
| Material | Plastic resin | Plastic resin | Plastic resin |
| Weight | 100 g/m² | 100 g/m² | 100 g/m² |
| Width | 1 m (3.3 ft) | 2 m (6.6 ft) | 4 m (13.1 ft) |
| Length | 100 m (328 ft) | 100 m (328 ft) | 100 m (328 ft) |
| Coverage per roll | 100 m² | 200 m² | 400 m² |
| Color | Black | Black | Black |
| UV protection | Yes (high) | Yes (high) | Yes (high) |
| Handling | 1 person | 2 people | 3–4 people |
Use case matrix → recommended variant
| If your case is… | Recommended variant |
|---|---|
| Flowerbed, planter, or residential garden with irregular shapes | → 1 m × 100 m |
| Lawn edge or narrow path between paving stones | → 1 m × 100 m |
| Family orchard or small nursery with standard paths | → 2 m × 100 m |
| Commercial garden path or greenhouse aisle | → 2 m × 100 m |
| Agricultural plantation, commercial nursery, or large area coverage | → 4 m × 100 m |
| Wide strip coverage under fruit trees in a line | → 4 m × 100 m |
Before buying, measure the actual width of your area with tape. If your plot is 3.5 m wide, don't buy 4 rolls of 1 m: buy one 4 m roll, and you'll have 50 cm left over that you can overlap against a wall or cut clean. If your plot is 5 m wide, combine one 4 m roll with one 1 m roll and make a single longitudinal joint, instead of five 1 m rolls with four joints. The rule is to minimize joints, because every joint is a point where weeds can sneak through after a few months.
Do not leave the mesh exposed to the sun for months without covering it. Although UV protection is high, the actual lifespan is multiplied several times when the mesh is covered with bark, gravel, or decorative substrate. Without coverage, direct radiation degrades the material and breaks appear in 12–18 months. With coverage, it lasts significantly longer.
Don't know what roll width is right for you?
Tell us the actual measurements of your area (length and width), if the geometry is regular or irregular and what covering will go on top (bark, gravel, substrate). You will receive the combination of rolls that minimizes joints and waste for your plot.
Frequently asked questions
How is the mesh fixed to the ground?
With metal U-shaped staples hammered every 1–1.5 m along the edges and at each joint between rolls. In areas with strong winds or slopes, reduce the spacing to 0.7–1 m. Along the perimeter, it is advisable to bury the mesh 5–10 cm in a small trench to prevent wind from lifting it at the edges. If covered with gravel or bark, the covering already provides sufficient weight, and you can space the staples further apart.
Can I plant through the mesh?
Yes. Once fixed, mark the position of each plant and make a cross (X) cut or a circular hole the diameter of the plant. Plant through the cut and, for added security, reinforce the cut with an additional staple to prevent it from widening over time. This technique is common for fruit trees, ornamental plants in rows, and nursery plantings.
What is the difference between this and opaque plastic mulch?
Weed control fabric is permeable: it allows water and air to pass through to the soil, making it suitable for areas with live plants and for prolonged use under decorative covering. Agricultural ground plastic is impermeable and is used in cultivation beds with drip irrigation, where water and temperature control are priorities. Each has its function: mesh for stable, permeable areas; plastic for cultivation beds with active agronomic management.