Tensioning strapping around a pallet or package until the load is truly tight—and holding it under tension while the seal is applied—is the step that decides whether the strapping survives transport or arrives loose. This manual tensioner for plastic strapping (PP and PET)—also called a strap tensioner or strapping tensioner—is manufactured by Maxtens with a toothed tension wheel, clamp base, operating lever, and built-in cutting mechanism, compatible with strapping 13 to 19 mm wide and 0.6 to 1.2 mm thick, designed for warehouses, logistics, export packaging, and industrial packing where strapping is a daily task, with no need for electricity or compressed air.
Key Benefits
- Fast, uniform tensioning: the lever and toothed tension wheel multiply the applied force, leaving the strap tight on the load in a few strokes and with repeatable tension package after package.
- Built-in cutter: the integrated cutting mechanism cuts the excess strap once tensioning is done, with no loose blades or separate scissors and no long tails left behind.
- Compatible with PP and PET from 13 to 19 mm: a single tool covers the most common plastic strapping widths in palletizing, with thicknesses from 0.6 to 1.2 mm.
- Light and portable: at 1.16 kg and 27 cm long, it goes with the operator to the workstation, the truck, or the job site, with no fixed strapping station or installation.
- No batteries or consumables of its own: 100% manual operation that works a full shift without recharging, electrical maintenance, or an air line.
Typical Applications and Uses
- Palletizing and bundling boxes in warehouses and logistics distribution centers.
- Export packaging where the strap must arrive tight after sea or land transit.
- Daily industrial packing in factories, workshops, and dispatch areas.
- Strapping in the field or on site, together with the sealer and metal seals.
Quality and Durability
An inexpensive tensioner fails at two points: the tension wheel loses its teeth (and the strap slips just when the most tension is needed) and the clamp base develops play, releasing the band before the seal is applied. Maxtens works with a steel body and a calibrated toothed tension wheel that grips the strap without tearing it, with a long-travel lever that keeps the tensioning force constant, which separates a tool for continuous professional operation from one that starts slipping within a few weeks.
Equivalences
Equivalent to these other-brand references:
- 13 - 19 mm (1/2 - 3/4 in)
- Strapex STT 20Cyklop ORS 13-19 mm
Brands and references mentioned belong to their respective owners; cited only for comparison and compatibility.
Is it compatible with steel strapping, or only plastic?
How does this tensioner differ from one for PET strapping?
Does it withstand intensive warehouse use, or is it for occasional use?
Do I also need a sealer or crimper to close the strapping?
Still have questions?
Ask us and we will gladly help you with whatever you need.
| Dimensions and format | |
|---|---|
| Tool dimensions | 270 × 65 mm (10.6" × 2.6") |
| Tool weight | 1.16 kg (2.56 lb) |
| Operation and ergonomics | |
| Actuation | Manual, lever-operated |
| Main components | Tension wheel, clamp base, cutting mechanism and lever handle |
| Strap cutting | Built into the tool |
| Compatibility and use | |
| Compatible strap width | 13 - 19 mm (1/2 - 3/4 in) |
| Compatible strap thickness | 0.6 - 1.2 mm (0.024 in - 0.047 in) |
| Compatible strap type | PP (Polypropylene) and PET (Polyester) |
| Tensioner: Width | 27.0 cm (10.63 in) |
|---|---|
| Tensioner: Height | 7.0 cm (2.76 in) |
| Tensioner: Depth | 17.0 cm (6.69 in) |
| Tensioner: Weight | 1.16 kg |
Official MAXTENS warranty
What's covered
Confirmed defect: replacement or refund of the amount paid.
What's not covered
Pago & Seguridad
