Standard drip irrigation tape

SKU: 299533

Not sure which variant to choose? Check our comparison.

Measure:
Settings:
Presentation:
Price:
Sale priceRD$ 16,500.00
RD$ 33.00/m

Tax included Shipping calculated at checkout

Inventory:
39 rolls Available for immediate pickup at our warehouses

We'll notify you when it's back in stock

Leave your details and we'll notify you as soon as this product is back in stock.

How would you like to be notified?

Watering row crops with maximum water efficiency, without losing water to evaporation or wetting non-productive areas, on relatively flat land and at a reasonable cost per meter, requires a flat LDPE drip tape with integrated 3D arc labyrinth emitters and controlled anti-clogging. This standard drip irrigation tape —also known as drip tape, flat drip line, or flat irrigation hose— is manufactured by Hidroplex from LDPE, 16 mm diameter and 0.3 mm thick (1200 gauge), under ISO 9261, in two emitter spacings (20 and 30 cm) with a 1.6 L/h flow rate, in 500 m rolls, designed for vegetables, row fruit crops, export crops with drip irrigation, and professional intensive agriculture.

Key benefits

  • 3D arc anti-clogging labyrinth: the internal design creates controlled turbulence that keeps fine particles in suspension and prevents sediment from settling inside the emitter, a critical condition for well or river water with the typical mineral load of the Caribbean.
  • ISO 9261 compliance: manufacturing meets the international standard for flow uniformity, diameter, and spacing —an audited requirement for serious agronomic projects and export production.
  • Built-in inlet filter on every emitter: the emitter's own filter protects against clogging from particles that bypass the head filter, adding an extra layer of protection to the system.
  • Compatible with mechanized laying: sized for tractor unwinders with calibrated tensile strength, allowing long continuous runs in agronomic projects without breakage stoppages.
  • 1200 gauge (0.3 mm) for a full agricultural season: calibrated thickness that withstands months of cultivation under Caribbean radiation without becoming brittle before harvest —a lifespan engineered for seasonal agricultural use.

Typical applications and uses

  • Row vegetables in greenhouses or open fields: tomato, bell pepper, cucumber, zucchini, eggplant.
  • Berries such as strawberry, and leafy vegetables in intensive production.
  • Export crops with controlled irrigation: pineapple, melon, watermelon, potato, tobacco, bell pepper, oil palm.
  • Combined with mulching film for efficient fertigation and simultaneous weed control.

Quality and durability

An economical drip tape fails on two counts: the internal labyrinth design is simple, with no 3D turbulence (causing rapid clogging from any sediment), and manufacturing does not comply with ISO 9261 and has loose tolerances (causing heterogeneous flow between emitters and crop non-uniformity). Hidroplex uses a 3D arc labyrinth and the ISO 9261 standard, which separates a drip tape built for a serious agronomic project from a generic tape that fails mid-season.

Also known as: Technical: drip tape, drip irrigation tape, flat drip line, perforated irrigation tape, flat dripper line. In DR and Caribbean: cinta de riego, cinta de goteo, manguera de riego plana, cinta plana. In other countries: drip tape (USA), driptape (USA), cinta de riego por goteo (LATAM), cintilla agrícola (LATAM), cinta de irrigación (MX), banda de riego (CO), cinta de goteo agrícola (ES).
What water pressure does this tape require for uniform emission, and why does it matter?

The operating range is kept strictly between 0.3 and 1 bar (4.35 to 14.5 psi). Below 0.3 bar flow drops and the emitters farthest from the manifold stop emitting; above 1 bar the tape is overloaded, emitters may exceed nominal flow and the material grows brittle over time. Standard flat drip tape has no pressure compensation, so on long runs (over 100 m) or sloped terrain it pays to split into sectors with valves or use the pressure-compensating version to equalize flow end-to-end.

What pre-filtration does the system need to prevent clogging?

Minimum filtration of 130 microns (120 mesh) at the irrigation manifold — non-negotiable technical requirement. The tape has a 3D arc labyrinth and a built-in filter at each emitter, but these are sized for fine particles: sand, silt, biofilm and carbonates do pass through and clog the labyrinth. For well or river water it pays to combine a 120-mesh screen filter with a disc filter for organic-matter retention. For hard water, inspect and clean the filters often (weekly in peak season). Without proper filtration the warranty does not apply.

Can this be installed with farm machinery for large fields?

Yes. The tape is sized for mechanized laying with a tractor-mounted unwinder, the standard setup for large areas (several hectares). The rolls are produced in continuous lengths without intermediate joints, and the tensile strength is calibrated to avoid tearing during unrolling. For manual or small-scale laying it also works perfectly. Always unroll with the emitter side facing up and apply uniform tension to avoid twists that reduce local flow.

What real precautions should be taken when using it under mulch film?

Three critical precautions. One: install the tape first on a leveled bed and then spread the mulch film over it, not the other way around. Two: prevent water droplets from forming between tape and plastic where they are exposed to the sun, since they create a magnifying-glass effect that melts and punctures the mulch. Three: set up active control of the rodents and pests that chew tape buried under plastic (darkness attracts rodents). To keep water condensed under the plastic from scorching the seedlings, check during the first week and install stakes or anchors along the line to keep it in contact with the soil.

Still have questions?

Ask us and we will gladly help you with whatever you need.

Material and construction
Material High-quality polyethylene (UV resistant)
Dimensions and format
Roll length 500 m (1640 ft)
Diameter 16 mm (5/8 in)
Wall thickness 0.3 mm (1200 gauge)
Irrigation and flow
Number of drippers per roll 2500 drippers
Flow per dripper (@ 1 bar) 1.6 L/h (0.42 gph)
Total roll flow rate 4000 L/h (1056.7 gal/h)
Distance between drippers 20 cm (8 in)
Required filtration 120 mesh (130 micron)
Maximum lateral length (on flat ground) 72 m (236.2 ft)
Recommended working pressure 1 bar (14.5 psi)
Operating pressure range 0.3 bar - 1 bar (4.35 psi - 14.5 psi)
Dripper type Turbulent flow labyrinth (anti-clogging)
Presentation and packaging
Presentation Roll 500 m (1640 ft) long
Standards and certifications
Production standard ISO 9261:2004
Certificaciones y normas
EN/ISO standards
Roll: Width 56.0 cm (22.05 in)
Roll: Height 56.0 cm (22.05 in)
Roll: Depth 35.0 cm (13.78 in)
Roll: Weight 22.8 kg

Official HIDROPLEX warranty

Verified Easy claims with Dodom
What's covered
Extended Dodom warranty of 18 months from delivery, which extends the protection of Law 358-05 (Arts. 66–70), against manufacturing defects in the Standard drip irrigation tape.
Confirmed defect: replacement or refund of the amount paid.
What's not covered
Any damage or deterioration unrelated to the manufacturing of the Standard drip irrigation tape, such as damage resulting from use, normal wear and tear, or external causes, including force majeure.

Pago & Seguridad